Original Factory Good Performance High Functionality Low Power Turbine Flow Meter for Scientific Research

Turbine flow meter is absorbing the advanced technology of domestic and foreign flow instrumentation through the optimization of the design, with a simple structure, lightweight, high precision, good reproducibility, responsive, easy to install and maintain the use of a new generation of turbine flow meter, widely used in measuring closed pipeline with stainless steel 1Cr18Ni9T, 2Cr13 and corundum AI203, carbide does not corrode, and no fibers, particles and other impurities, the working temperature of the kinematic viscosity of less than 5x10-6m2/s liquid, for the kinematic viscosity of more than 5x10-6m2/s liquid, can be the flowmeter of the liquid. Impurities, working temperature kinematic viscosity less than 5x10-6m2 / s of the liquid, for kinematic viscosity greater than 5x10-6m2 / s of the liquid, the flowmeter can be calibrated after the use of real liquid. If with a special function of the display instrument supporting, but also for quantitative control, over the amount of alarm, etc., is the flow measurement and energy saving of the ideal instrument.
Turbine flow meter application areas are relatively wide, petroleum, chemical, metallurgy, scientific research and other fields of measurement, control systems, equipped with sanitary fittings gas turbine flowmeter can be used in the pharmaceutical industry.

High accuracy, generally up to 1% R, ± 0.5% R, high-precision type up to earth 0.2% R; (R refers to the reading error)
Good repeatability, short-term repeatability of up to 0.05% ~ 0.2%, it is because of good repeatability, such as frequent calibration or online calibration can be extremely high accuracy, in trade settlement is the preferred choice of flowmeter

Output pulse frequency signal, suitable for total measurement and connection with computer, no zero drift, strong anti-interference ability
Original pulse frequency range (10Hz~1.5KHz), strong signal resolution.

Wide range ratio,10:1~20:1
Compact and lightweight structure, easy installation and maintenance, large flow capacity
Applicable to high-pressure measurement, the instrument body does not have to open holes, easy to make high-pressure type instrument; special sensor types, according to the user's special needs can be designed for various types of special sensors, such as low-temperature type, two-way type, and under the type, sand mixing special type, etc.

Can be made into an insertion type, suitable for large diameter measurement, small pressure loss, low price, can be taken out without stopping the flow, easy installation and maintenance